The Quintum Response Point digital T1/E1/PRI Gateway supports T1, E1 or PRI connections. These digital gateways support up to 30 simultaneous VoIP calls and are capable of interfacing with a full E1. This flexibility makes these gateways the Perfect Fit for small and medium businesses with digital telephone network connections.

Digital Gateway Specs

• Automatic call type detection: Voice/Modem/Fax
• Answer and Disconnect Supervision
• Trunk group support

• Voice algorithms: G.723.1 and G.729ab, G.711
• Auto codec negotiation
• Fax Support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, using industry standard T.38; Super G3 compatible up to 33.6 Kbps
• Modem support with G.711
• Standard Connectors: Digital: RJ-45; Analog: RJ-11 Connectors
• Coding: A-law, ?-law
• Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize
• PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
• T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
• E1 CAS (R2 MF)
• Maximum Call Rate: 7,200 calls/hour

• LAN Interface: Fast Ethernet port (10/100 Base-T)
• Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
• DHCP Client
• QoS Support: IP TOS, DiffServ

• Up to 30 simultaneous VoIP calls

• Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
• Command Line Interface

• Operating temperature: 40° - 104° F (5° - 40° c.)
• Operating humidity: 20% - 80% non-condensing
• EMC: FCC Part 15, EN55022, EN55024, EN61000-2-3, EN61000-3-3
• Safety: UL60950, EN60950, AS/NZS60950
• Telco: FCC Part 68
• 1U High Chassis
  W 8 1/4" x H 2" x D 7"
  W 21cm x H 5.1cm x D 18.73cm
• AC Power: 100-240 Volts AC, 50/60 Hz, 22 watts
• Maximum weight: 1.3 lbs. (0.6kg)
• Telco: AS/ACIF S003, CS03, JATE AS/ACIFS002:2001
• EMC: FCC Part 15 Class B, AS/NZS3260